TIG Welding ‘FIRE MATE’ Glove / Gauntlet – Kevlar Stitched LARGE
Also recommended for MIG welding
High Quality ‘FIRE MATE’ Glove
Reinforced thumb crotch
Straight thumb
Flame Resistant Stitching
The stitching on the TIG Welding Glove has be sewn using Flame & Heat Resistant Kevlar® thread.
Sidesplit cuff
Has a 150mm stiff sidesplit cuff to protect your wrists.
Full grain Goat Leather
The TIG Welding Glove is made from only the finest Premium Full grain Goat Leather – this allows for great flexibility and dexterity.
RECOMMENDED USES
- MIG welding
- TIG welding
- Sheet metal fabrication
Mechanical Hazard Certified EN388
The EN388 standard applies to all types of protective gloves with respect to mechanical aggression from abrasion, cutting, tearing and puncture. These ratings are calculated from lab test results and do not replace the actual testing of the products in real conditions arising from use in the field. The results do however enable you to compare the performance between products. The TIG Welding Glove has a EN388 rating of 4-1-4-3. Basically they are rated ‘Excellent’ against Abrasion, ‘Average’ against blade cuts, ‘Very Good’ against tearing and ‘Very Good’ against puncture.
HEAT Certified to EN407
The EN407 standard defines the general requirements and the thermal performance of gloves to protect from heat and fire. It applies to gloves which protect hands from fire, contact heat, radiating heat, small spray of molten metal or large spray of melting metal. ThisTIG Welding Glove has been given a rating of 423X4X which means it has an ‘Excellent’ rating for resistance to Flammability, an ‘Good’ rating for resistance to contact heat, is rated ‘Very Good’ for resistance to Convective heat, has an ‘Excellent’ rating for protection from Large Molten Metal Spray, and other ratings (X) that are not applicable.
